This is the spit that is used in our and XB125 Rotisserie systems. It is made from 304 (food grade) stainless steel pipe and is custom machined to our specifications. For storage and shipping purposes, the spit is cut into two 36" pieces and is joined by a coupler rod which sleeves into each half and is bolted into place.
This spit is designed to fit into a 3/4 inch male coupler or a 1" female coupler and there is a hole pre-drilled for the coupler bolt. There are holes every 4 inches for use with our spit pin trussing bolts. A hole at the other end can be used for our hand crank or spit stop.
Note: since this is technically "pipe" and not "tube" the dimensions are not exact (nominal). Different brands of steel and different batches of pipe may differ slightly and cause things not to fit as expected. In addition there is a weld seam in each pipe which may need to be reduced to fit into your system.
- Length: 72"
- Outside dimension: 1.1"
- Inside dimension - 3/4"
- Material - 304 stainless steel
- Capacity - up to 150 lbs. balanced load